I am DAVID, the founder of HOYECHI. Recently, I have received many requests from customers, many of which can not be installed. This is really frustrating. The most exciting moment of Christmas is the moment when I take apart the newly bought decorations and prepare to light up the courtyard. But many people may feel frustrated when they see the scattered parts in the box and feel that they don't know how to start.
But rest assured! I can tell you through this article, it's really not that complicated, follow my steps, you will find that you can quickly assemble the HOYECHI outdoor luminous reindeer. When making products, we take into account the convenience of users, installation and logistics costs. Installation also does not require complex tools, does not require advanced professional knowledge of electricians, as long as the following steps, about 8-15 minutes, can make this beautiful reindeer stand on your lawn.
Preparations
Before you begin, have the following items ready:
Your HOYECHI box (contains: reindeer parts, ties, ground nails,).
A pair of scissors (to trim the excess of the cable tie).
Here is another suggestion: If you are assembling indoors, it is recommended to lay a layer of newspaper or mat on the floor, because a small amount of glitter may fall off the brand-new decorations, so it is easier to clean up after installation.
Step 1: Unpacking and sorting (2 minutes)
At this time, carefully open the box, take out all the parts and put them on the ground. The reindeer of HOYECHI are mainly composed of the following parts:
1.Torso
2.Head and neck
3.Legs-divided into front and rear legs
4.Antlers and tail
5.Accessory kit (ties and pegs)
David reminds you: Please do not rush to install at this time! This is a good time to check the circuit.
Step 2: Power-on test (1 minute)
Many customers will ignore this step, but this step is very important! Before assembly, insert the plug into the power supply to ensure that all LED lights can be properly lit. If everything is OK, start the assembly after unplugging the power supply. According to this operation, if there is a fault, it will be troublesome to remove it after installation.
Step 3: Assemble the body (5-7 minutes)
Next is the main part of today, don't worry, HOYECHI's Christmas deer is actually as simple as building blocks:
Install the legs first: Find the metal socket under the torso. First distinguish the front and back legs, do not confuse, you can look at the instructions, the shape of the front and back legs is completely different, after making clear the front and back legs, insert them into the corresponding jacks. The HOYECHI design will have metal hooks and latches to ensure they snap into place. So it doesn't fall off.
Next, attach the head of the deer lamp: Align the head/neck assembly with the junction at the front of the torso. This step is easy because there is only one head.
Once the head is installed, start installing the antlers and tail: insert the antlers into the socket on the top of the head and the tail into the back of the torso. This step is also very simple, even if the wrong direction does not matter, just change back, because it is too easy.
Ok, then the basic installation is done, then it is necessary to fix the cable tie, this step can not be omitted, otherwise it will be unstable, please take out the plastic cable tie included in the package. At each connection point (leg-to-body, head-to-body seams), run a cable tie through the metal frame and pull tight.
Also note that after tightening the cable tie, use scissors to cut off the extra "little tail" so that the appearance is cleaner. Of course, you don't have to cut it if you think it's okay.
Step 4: Connect the connector of the light string. It usually takes 1-3 minutes.
During assembly, you will see wire splices hanging between the parts.
Find the corresponding male and female plugs. If you insert the wrong plug, the light will not be lit, but it will not burn out the light. But you feel that it is very easy to insert the wrong plug, indicating that the plug is correct. If it is wrong, it is difficult to insert the wrong plug, because HOYECHI is deliberately to prevent the wrong plug.
At this time, connect them tightly and tighten the waterproof cover. All right, that's all for the basic installation. By the way, we also need to tidy up the extra wires and stuff them into the open space inside the reindeer's body to keep the appearance fresh. Beautiful termination is the first.
Complete the above actions to start outdoor installation, take your children, your relatives to the front yard to enjoy the sense of achievement and joy of installation:
Use ground spikes: This is especially important in windy winter weather. Push the attached metal ground spike across the metal base at the bottom of the reindeer and drive it deep into the dirt. There is no need to explain this step, just fix it with the ground.
It is recommended that each foot be fixed with a ground nail to ensure that it will stand up in the wind and rain.
Haha! Now is your moment, bring the whole family to celebrate, is there a full sense of achievement, whenever this moment I have such a sense of achievement! It's done!
Plug it in, take a few steps back, and enjoy your masterpiece!
Made of high-quality LED beads and weather-resistant materials, HOYECHI's luminous reindeer is not only elegant during the day, but also brilliant at night.
Want to make your yard more impressive? Many customers like to combine "male deer", "female deer" and "fawn deer" to create a warm reindeer family scene.
